Launch pricing on both presses, free freight shipping in the contiguous US
ID Press Inc. logo
Shop presses
Professional heat presses

Even heat. Exact pressure. Every press.

ID Press builds commercial heat presses for print shops and apparel brands that press all day. Pneumatic power when you need volume, a compact clamshell when you need space.
Shop the Machine #A
Compare presses
  • 2 year warranty
  • Ships from the US
  • Real people on support
Digital touch controller
Save up to 10 material presets.
Emergency stop
Releases the platen and cuts heat.
Pressure regulator
Dial in 60 to 100 psi.
Quick-change platen
Swap sizes in seconds, no tools.
Slide-out drawer
Lay out away from the heat.

Free freight shipping

Contiguous US, ships in 2 business days

2 year warranty

Parts and heating element

US based support

Phone and video setup help

Secure checkout

Cards, PayPal and pay over time

About ID Press

Built for shops that press all day.

ID Press Inc. designs heat presses for the people who run them eight hours a day: screen printers adding transfers, apparel brands pressing their own drops, and promo shops turning orders around overnight.

Every model starts from the same rule. Heat has to be even from edge to edge, and pressure has to be the same on the first shirt and the five hundredth. Then we back it with a warranty and a support line staffed by people who have pressed thousands of garments themselves.

±3°F
Temperature spread across the platen
16 x 20
Inch platen on the AirSwing
10
Saved material presets
Print shop owner stacking shirts pressed on an ID Press heat press
Pneumatic · Swing-away · Slide-out drawer

Machine #A

16 x 20 in pneumatic heat press for high volume apparel
$1,895
$2,195
Launch price
In stock · Ships in 2 business days
Air pressure does the work, so every press lands with the same force no matter who is running the machine. The upper platen swings away and the base slides out toward you, which keeps your hands clear of the heat while you lay out the next garment.
  • Auto-open at the end of every cycle, with no arm fatigue
  • Threadable lower platen for sleeves, hoodies and tote bags
  • Five quick-change lower platens, swapped without tools
  • Digital pressure gauge and 10 saved presets
Buy now

Specifications

Platen size
16 x 20 in (40 x 50 cm)
Operation
Pneumatic, auto-open
Design
Swing-away, slide-out drawer
Max temperature
450°F (232°C)
Heat spread
±3°F
Timer
0 to 999 s
Air supply
60 to 100 psi
Power
220V, 2,200W
Lower platens
5 quick-change sizes
Machine size
17.1 x 29.3 x 20.3 in
Weight
121 lb (55 kg)
Warranty
2 years
Machine #A press, 16 x 20 in lower platen with silicone pad, air hose and quick coupler, Teflon sheet, power cord, and a quick start card with a setup video link.
A 220V outlet, an air compressor that holds 60 to 100 psi, a level bench rated for at least 150 lb, and about 18 in of clearance behind the press for the swing.

Edge to edge heat

A cast-in heating element keeps the whole 16 x 20 in surface within 3°F.

Heat-free workspace

Swing the platen aside and slide the base out. Layout happens away from the heat.

Consistent pressure

Pneumatic force from 60 to 100 psi, the same on every cycle.

Safety first

Emergency stop, overheat cutoff and auto-release are standard.

Clamshell · Auto-open · Standard outlet

Machine #B

15 x 15 in auto-open clamshell for small shops and side businesses
$649
$749
Launch price
In stock · Ships in 2 business days
A professional press that fits on a desk and plugs into a regular wall outlet. When the timer ends, a magnetic latch releases and the platen opens on its own, so a transfer never overcooks while you are trimming the next one.
  • Runs on standard 110V power, no special wiring
  • Magnetic auto-release at the end of the timer
  • Center pressure knob with a printed scale
  • Desk sized footprint, 15.7 x 24.4 in
Buy now

Specifications

Platen size
15 x 15 in (38 x 38 cm)
Operation
Manual close, magnetic auto-open
Design
Clamshell
Max temperature
450°F (232°C)
Timer
0 to 999 s
Pressure
Center knob, printed scale
Power
110V, 1,400W
Presets
5
Machine size
15.7 x 24.4 x 17.3 in
Weight
46 lb (21 kg)
Warranty
2 years
Machine #B press, silicone pad, Teflon sheet, power cord, and a quick start card with a setup video link.
A standard 110V wall outlet and a sturdy table. No compressor needed.

Plug in and press

1,400W on a standard outlet. Ready to press in about 8 minutes.

Opens on its own

The magnetic latch lets go when the timer ends. No scorched transfers.

Small footprint

15.7 in wide. Fits a craft room, a booth or the corner of a shop.

Grows with you

Pairs with the AirSwing later as a second station for small items.

Compare

Which press fits your shop?

Model
Machine #A
Machine #B
Best for
Daily runs of 100+ pieces
Small batches and custom orders
Platen
16 x 20 in
15 x 15 in
Pressure
Pneumatic, 60 to 100 psi
Manual knob
Power
220V, 2,200W
110V, 1,400W
Opens
Swing-away, auto-open
Clamshell, auto-open
Launch price
$1,895
$649
Applications

One press, every substrate you sell.

T-shirts and hoodies

DTF, HTV and screen transfers

Sublimation

Polyester, panels and mousepads

Bags and totes

Threadable platen, no seams in the way

Sportswear

Names, numbers and team logos

Hats and sleeves

With the optional small platens

Aprons and workwear

Heavy cotton and poly blends

Flags and banners

Pressed in sections on the 16 x 20

Labels and tags

Tagless neck prints
Support

Questions before you buy

Still unsure which press to pick? Send us what you print and how many a day, and we will tell you straight.
Yes. Any shop compressor that holds 60 to 100 psi works. A quiet 1 gallon unit is enough for most shops, since each press uses very little air.
The Machine #A runs on 220V, like a dryer outlet. The Machine #B runs on a standard 110V wall outlet.
Yes. Save a preset for each material and switch between them in one tap on the controller.
Freight shipping is free in the contiguous US. The AirSwing arrives on a pallet, and the AutoClam ships in a double box by ground.
Two years on parts and the heating element, plus setup help over phone or video for the life of the machine.
Get in touch

Talk to a press specialist.

Tell us what you press and how much. We reply within one business day with a recommendation and a shipping quote.
Email
sales@idpress.us
Hours
Monday to Friday, 9 am to 6 pm ET