Free freight shipping on every press in the contiguous US. Talk to a specialist ›
Free freight shipping on every press in the contiguous US. Talk to a specialist ›
New · Machine #A
Professional heat presses with mapped, even heat, digital pressure you can read, and a real person on the phone when you need one.
Free freight shipping
Contiguous US, liftgate included
2-year warranty
Parts and heating element
Real phone support
US based, Monday to Saturday
30-day returns
On unused presses
About ID Press
ID Press Inc. makes professional heat presses for print shops, apparel brands and promo decorators. Every platen is heat-mapped and every press is pressure-tested before it leaves us, so the first shirt of the morning and the four-hundredth look the same.
When something needs attention, you call a person who knows the machine. That is the whole idea.
±2°F
Platen temperature variance, mapped at 9 points
0–100
PSI digital pressure readout
10
Material presets saved on the controller
450°F
Maximum platen temperature
Pneumatic swing-away
Air-driven pressure that lands the same on every press. Swing the hot platen fully clear, slide the base toward you, and dress the next garment with no heat over your hands.
Pneumatic
A compressor-fed cylinder closes the press with two-hand safety start and opens it automatically at zero on the timer.
Platen
16×20
inches of heat-mapped cast aluminum. Big enough for adult 3XL fronts and full tote bags.
Slide-out base
Pull the lower platen forward on rails to load, lay out and peel well away from the heat.
Threadable
Thread the garment onto the lower platen once and print every location without re-hooping.
Platen
16 × 20 in (40 × 50 cm)
Press type
Pneumatic swing-away, slide-out base
Power
220 V, 2200 W (110 V model available)
Temperature
Up to 450°F (232°C)
Timer
0 to 999 seconds
Pressure
Digital readout, 0 to 100 PSI
Air supply
60 to 100 PSI compressor, not included
Lower platens
Quick-change, tool-free, threadable
Dimensions
17.1 × 29.3 × 20.3 in
Weight
Approx. 128 lb (58 kg)
Certification
CE (EMC, LVD, RoHS)
Warranty
2 years parts and element
Auto-open clamshell
Small footprint, serious daily output. The platen lifts itself the moment the timer ends, so nothing scorches while you trim the next transfer.
Auto-open
A magnetic latch holds pressure through the cycle and releases at zero. Walk away to the next order without a scorched print.
Footprint
24″
deep. Fits a standard bench or a craft room table with room to spare.
Plug in anywhere
Runs on a standard US outlet at 1400 W. Set up in under ten minutes.
Made for
Tees, totes, patches, mouse pads and kids sizes, with a preset for each.
Platen
15 × 15 in (38 × 38 cm)
Press type
Clamshell, magnetic auto-open
Power
110 V, 1400 W
Temperature
Up to 450°F (232°C)
Timer
0 to 999 seconds
Pressure
Adjustable knob, digital readout
Heating
Cast-in element, 1 in aluminum platen
Dimensions
23.6 × 16.5 × 17.3 in
Weight
Approx. 55 lb (25 kg)
Warranty
2 years parts and element
From $2,490
16 × 20 in
Platen
Pneumatic
Auto close and open
Swing-away + slide-out
Heat-free loading
220 V
Compressor required
Production shops
Best for 150+ pieces a day
From $1,190
15 × 15 in
Platen
Magnetic
Auto open
Clamshell
Smallest footprint
110 V
No compressor
Growing shops
Best for up to 150 pieces a day
Press guide
These ship as presets on both controllers. Always follow your transfer supplier’s sheet first.
Material
Temp
Time
Pressure
Peel
DTF transfer, cotton
300°F
12 s
Medium, 40 PSI
Warm
HTV vinyl, cotton/poly
305°F
12 s
Medium, 40 PSI
Hot
Sublimation, polyester
385°F
50 s
Light, 25 PSI
Hot
Screen print transfer
350°F
8 s
Heavy, 60 PSI
Cold
Rhinestone transfer
330°F
20 s
Heavy, 60 PSI
Cold
Accessories
Sleeve 4 × 16, youth 10 × 12, pocket and round, tool-free for AirSwing
From $79
1 HP, 6 gal, oil-free, 60 dB. Made for the Machine #A
$249
16 × 20 in, reusable, pack of three
$24
Four sizes for seams, zippers and buttons
$39
For the Machine #A, yes. Any compressor that delivers 60 to 100 PSI works; a 1 HP, 6 gallon unit is plenty for one press. The Machine #B needs no air.
The Machine #B runs on a standard 110 V outlet. The Machine #A ships as 220 V by default; a 110 V version is available if you ask before ordering.
Presses ship by freight within 2 business days and arrive in 3 to 7 business days in the contiguous US. Liftgate delivery is included.
Two years on parts and the heating element, plus phone support for as long as you own the press.
Yes. Pay over 6, 12 or 24 months at checkout, subject to approval.
Get in touch
Tell us what you print and how many pieces a day. We will tell you honestly which press fits, and what else you need to start.
info@idpress.us
Phone
(800) 555-0143
Hours
Mon to Sat, 9 AM to 6 PM ET
